Panasonic KX-TCD400RUB

KX-TCD400RUB I KX-TCD400RUC I KX-TCD400RUF I KX-A140RUB I KX-A140RUC I KX-A140RUF
6.8. Call BAR On/Off (Call Prohibition On/Off)
You cannot make any dialling if call BAR is on.
To exit the operation, press <§) any time.
*1: The factory preset is 0000.
*2: If
"O N " is selected, -]•• is displayed (Refer to Handset Display (P.19)).
6.9. Selecting the Display Language
• To exit the operation, press <§ any time.
• *1 You can select one of 10 languages. If you set a language you cannot read, reset the handset to its initial settings.
Press MENU ^ DOWN ^ RIGHT ^ UP ^ RIGHT ^ 4-digit Handset PIN ^ UP ^ OK
All handset setting will be reset to their initial settings, however, the Phonebook data will be saved.
6.10. Select Dialling Mode (Tone/Pulse)
You can change the dialling mode to tone or pulse depending upon your network service. If you have a touch tone service,
select tone. If you have rotary or pulse service, select pulse.
У С Щ ) 2 С ж З С З ^ "INPUT CODE" 3 Q )
Press Search/Select
MENU. "SETTING BS".
Г С D |Tone|
4 4-digit Base Unit PIN*1 5 C D 6
OR 7 ( Щ )
Pulse Press OK.
• To exit the operation, press (§ any time.
• *1: The factory preset is 0000.
16