27
Telephone System
Using the Telephone
Dialling with the Redial List
• If there are no items stored in the redial list when is pressed, the base unit display
shows “Memory Empty”.
• When scrolling reaches the end of the list, an end tone will sound.
• You can also press to make a call.
• To edit or delete from memory, see page 85.
Dialling the Last Number Dialled
Auto Redial
If you press then to redial a number and the dialled number is engaged, the unit
will automatically redial the number every 40 seconds, up to 12 times. When using Auto
Redial, press after pressing if the muting has not been cancelled.
Recall Feature
RECALL (on the cordless handset) or (on the base unit) is used to access
special telephone services. Contact your Network provider for details. If your unit is
connected to a PBX, pressing (on the cordless handset) or (on the base unit)
allows you to access certain features of your host PBX, such as transferring an
extension call.
Voice Mail
Voice Mail is a service of your Network provider and will only operate if you have
subscribed to this service. After subscription, will be displayed on the cordless
handset and the base unit to indicate you have a message waiting. Please consult your
Network provider for details of this service.
• If still remains on the display even after you have listened to new messages, turn
it off by moving the JOYSTICK left (cordless handset) for 2 seconds.
1
Press REDIAL.
2
Search for the desired
dialled item.
3
Lift the handset.
1
Lift the handset.
2
Press REDIAL.
535HK.book27ページ２００３年９月２２日 月曜日 午前９時１７分
To Next Page
Loading...
