Panasonic KX-TCD535HK

71
Telephone System
Handset Settings
Setting the Handset Key Tone ON/OFF
You can turn the key tone ON/OFF.
To exit the operation, press at any time.
• The factory preset is “On”.
Display Options
To exit the operation, press at any time.
Selecting the Standby Mode Display
• The factory preset is “Handset Name”.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Tone
Option”.
4
Press JOYSTICK to
select “Key Tone”.
5
Select “On” or “Off”.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Display
Option”.
Go to step 4.
Follow steps 1 to 3 shown above, then:
4
Select “Standby Display”.
5
Select “Base Number” (p. 92), “Handset
Name” (p. 75), “Terminal No.” (p. 61) or
“Off”.
535HK.book71ページ２００３年９月２２日 月曜日 午前９時１７分