Panasonic KX-TCD535HK

70
Handset Settings
Setting the Ringer Volume
The choices are 6 levels and off. If you set the volume to OFF, “ ” is displayed,
however, the volume of a paging and intercom call is still at level 1.
• The factory preset is 6.
Selecting the Ringer Pattern for External Call/Internal Call/Paging
• The factory preset is 1.
Selecting the Ringer Pattern for Private Ring
• The factory preset of each ringer pattern is 1.
1
Press JOYSTICK
(or move).
2
Select “ Ringer
Option”.
3
Select “Ringer
Volume”.
4
To increase volume, move the JOYSTICK up.
To decrease volume, move the JOYSTICK down.
5
Press
JOYSTICK.
Follow steps 1 and 2 shown above, then:
3
Select “EXT Ringer Type”, “INT
Ringer Type” or “Paging Tone”.
4
Select the desired ringer pattern.
Follow steps 1 and 2 shown above, then:
3
Select “Private
Ring”.
4
Select the desired
category.
5
Select the desired
ringer pattern.
535HK.book70ページ２００３年９月２２日 月曜日 午前９時１７分