Panasonic KX-TDA100

Using the Handset Phonebook
25
Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of 3 character modes by pressing the Right Soft
Key while entering a name. The function icon above the soft key
displays the current character mode.
See “Character Mode Table” (page 26) for available characters.
Example: To enter “Anne” in Alphabet Mode.
• To switch between uppercase and lowercase, press .
• To enter a character located on the same dialing key as the previous character,
move the cursor by moving the Joystick , then enter the desired character.
• If you enter a different character by mistake, move the Joystick to highlight
the character, press to delete it, then enter the correct character.
• To clear an entire line, press for more than 1 second.
• To move the cursor, move the Joystick .
A, a
B, b
C, c
2
Alphabet Numeric Extended 1
To change the character mode while editing a name in the Phonebook, press
the Right Soft Key.
6 6
2
3 3
6
6
CLR
CLR