EasyManua.ls Logo

Panasonic KX-TG1100FX - Specifications and Mounting; Unit Connections; Wall Mounting Guide

Panasonic KX-TG1100FX
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Useful Information
Specifications
Standard: DECT (Digital Enhanced
Cordless Telecommunications)
Number of channels: 120 Duplex
Channels
Frequency range: 1.88 GHz to 1.9 GHz
Duplex procedure: TDMA (Time
Division Multiple Access)
Channel spacing: 1,728 kHz
Bit rate: 1,152 kbit/s
Modulation: GFSK (Gaussian
Frequency Shift Keying)
RF transmission power: Approx. 250
mW
Power source: 220–240 V, 50 Hz
Power consumption:
Base unit:
Standby: Approx. 3.5 W
Maximum: Approx. 9.2 W
Charger
*1
:
Standby: Approx. 0.6 W
Maximum: Approx. 5.0 W
Operating conditions: 5 °C–40 °C, 20
%–80 % relative air humidity (dry)
Dimensions:
Base unit: Approx. 58 mm × 123 mm × 115
mm
Handset: Approx. 143 mm × 48 mm × 32
mm
Charger
*1
: Approx. 60 mm × 86 mm × 84
mm
Mass (weight):
Base unit: Approx. 180 g
Handset: Approx. 120 g
Charger
*1
: Approx. 120 g
*1 KX-TG1102 only
Note:
L Specifications are subject to change.
L The illustrations used in these operating
instructions may differ slightly from the
actual product.
Connections:
The unit will not work during a power failure.
We recommend you connect a standard
telephone on the same line for power
protection.
Wall mounting
Base unit
Charger (KX-TG1102 only)
80 mm
Screws
Screws
28 mm
TG1100_1102FX(e-e).book Page 19 Wednesday, February 15, 2006 11:42 AM

Related product manuals