Getting Started
10
*1 Caller ID subscribers only
*2 Voice mail subscribers only
Turning the power on/off
Power on
Press {ic}.
Power off
Press {ic} for about 2 seconds.
Initial settings
Display language
1
{j/OK}
2 {r}: “Setup” s {j/OK}
3 {r}: “Language” s {j/OK}
4 {r}: Select your desired language. s
{j/OK} s {ic}
Note:
L If you select a language you cannot read:
{ic} s {j/OK} s {V} 4 times s
{j/OK} 2 times s {r}: Select your
desired language. s {j/OK} s {ic}
Date and time
1
{j/OK}
2 {r}: “Set Time” s {j/OK}
3 {r}: “Date & Time” s {j/OK}
4 Enter the current date, month, and year.
s {j/OK}
Example: 15 July, 2011
15 z7 11
5 Enter the current hour and minute. s
{j/OK}
Example: 15:30
15 3z
L If you enter the wrong date and/or time,
press {C} and perform again from step
3.
6 {ic}
Note:
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {j/OK}
2 {r}: “Setup” s {j/OK}
3 {r}: “Dial Mode” s {j/OK}
4 {r}: Select the desired setting.
5 {j/OK} s {ic}
k Phonebook is opened.
0 New voice mail message
received.
*2
(page 20)
Symbol meaning:
Example: {r}: “Off”
Press {V} or {^} to select the words in
quotations.
Item Meaning
TG161xCX(e).book Page 10 Monday, April 25, 2011 8:50 AM
To Next Page
Loading...
