Panasonic KX-TG1611AL - Getting Started; Unit Setup and Connections; Battery Installation and Charging

Getting Started
8
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PNLV226AL.
L When mounting the unit on a wall, see page
28.
■ Base unit
Important:
L First plug in the supplied telephone line
cord and then plug in the AC adaptor
cord.
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
■ Charger
Battery installation
L USE ONLY Ni-MH batteries AAA (R03)
size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
To socket
DSL/ADSL filter*
“Click”
(220-240 V AC,
50/60 Hz)
Press plug firmly.
Use only the supplied
telephone line cord.
Hook
Correct Wrong
“Click”
(220-240 V AC,
50/60 Hz)
Hooks
Rechargeable Ni-MH ONLY
TG161xAL(e).book Page 8 Thursday, February 17, 2011 5:23 PM