Panasonic KX-TG1840AL

Preparation
12
Base unit
A Speaker
B Charge contact
C Display
D {Answer on}/Answer on indicator
E {d} (Greeting)
F {4} (Erase)
G Navigator key
L{>}{<}: To adjust the ringer and
speaker volumes.
L{<}{>}: To select the desired
ringtone or to repeat or skip the
recorded messages.
H {x} (Page)
I {R} (Recall)
J {R} (Redial/Pause)
K {T} (Mute)
L Microphone
M {s} (Speakerphone)/Speakerphone
indicator
N In use indicator
L Lights when a handset is in use (on a
call, editing the shared phonebook,
using the answering system, etc.).
L Flashes when a call is being received
or when the answering system is
answering a call.
O {5} (Play/Stop)
Displays
Handset display icons
Various icons appear on the handset display
to indicate the current status of the unit.
B
C D
A
J
E F G
KL OMNIH
Display
icon
Meaning
w Within range of a base unit
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
k Handset is on an outside
call.
o Call bar is on. (page 32)
u Answering system is on.
(page 50)
5 Battery strength
[VE] Voice enhancer is set to
high or low tone. (page 18)
[N] Night mode is on. (page 30)
[X] Key lock is on. (page 18)
[2] Handset number: The left
icon shows handset 2
example. (page 31)
-2- Base unit number: The left
icon shows base unit 2
example. (page 31)
F New SMS message
received (SMS users only;
page 45)
The base unit is on a call.
Another handset is on a call
or is using the answering
system.
TG1840AL(e-e).book Page 12 Tuesday, April 11, 2006 11:02 AM