Preparation
14
of the adaptor may cause it to become
disconnected.
L The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
socket using a telephone double adaptor.
L This unit is not designed to be used with
rotary (pulse dialling) services.
If you subscribe to an ADSL service
L Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the telephone
line socket in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 39) do not
function properly.
Battery installation
1 Insert the batteries negative (T)
terminal first.
2 Close the handset cover.
Note:
L Use only rechargeable batteries (page 6).
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
Telephone
line cord
To socket
Noise filter
(For ADSL users)
TG1840AL(e-e).book Page 14 Tuesday, April 11, 2006 11:02 AM
To Next Page
Loading...
