To Next PageTo Next PageWhy can't people leave voice messages on my Panasonic KX-TG2431. Cordless Telephone?
If the other party complains that they cannot leave a voice message on your Panasonic Cordless Telephone, the recording time may be set to “Greeting only”. Select “1min”, “2min”, or “3min”. The memory might also be full; erase unnecessary messages.
Why is Caller ID not working on my Panasonic KX-TG2431. Cordless Telephone?
If your Panasonic Cordless Telephone does not display the caller’s name and/or phone number, you may not have subscribed to Caller ID service. If your unit is connected to any additional telephone equipment such as a Caller ID box or wireless telephone jack, disconnect the unit from the equipment and plug it directly into the wall jack. If your unit is connected to a telephone line with xDSL service, connect a noise filter between the base unit and the telephone line jack. The name display service may not be available in some areas. Other telephone equipment may be interfering with this unit; disconnect the other equipment and try again. If a call is being transferred to you, the caller information will not be displayed. Generally caller information is displayed from the 2nd ring.
What to do if my Panasonic KX-TG2431. does not work?
If your Panasonic Cordless Telephone unit does not work, try the following: * Ensure the battery is correctly installed. * Check the connections. * Fully charge the battery. * Clean the charge contacts and charge again. * Unplug the base unit’s AC adaptor to reset it, then reconnect and try again. * Re-install the battery and fully charge it.
What to do if Panasonic KX-TG2431. still says 'Recharge battery' after charging?
If you have fully charged the battery of your Panasonic Cordless Telephone, but “Recharge battery” is still displayed and/or 7 continues to flash, or “Charge for 6h” and 8 are displayed, clean the charge contacts and charge again. The battery may also need to be replaced.
Why does my Panasonic Cordless Telephone say 'Charge for 6h'?
If your Panasonic Cordless Telephone displays “Charge for 6h” and 8, and the handset does not work, it means the battery has been discharged. Fully charge the battery.
How to correct the date and time on my Panasonic KX-TG2431. answering machine?
When you play back messages or turn on the answering system, and the base unit and handset of your Panasonic Cordless Telephone announce the day and time incorrectly, set the date and time again.
Why can't I program items on my Panasonic Cordless Telephone?
If you cannot program items on your Panasonic Cordless Telephone, it may be because programming is not possible while the handset and base unit are being used. Also, do not pause for over 1 minute while programming. Try moving closer to the base unit. If another user is listening to messages or the answering system is answering a call, you cannot program; try again later.
What to do if Panasonic KX-TG2431. says 'No link to base'?
If the display on your Panasonic Cordless Telephone shows “No link to base. Move closer to base, try again.” and an alarm tone sounds, it could be due to the following reasons: * The handset is too far from the base unit; move closer and try again. * The base unit’s AC adaptor is not plugged in; plug it in. * The base unit antenna is not raised; raise it. If these steps do not solve the problem, the handset may have lost communication with the base unit. Register the handset again.
How to stop static on my Panasonic Cordless Telephone?
If you are experiencing static or the sound cuts in and out on your Panasonic Cordless Telephone, and suspect interference, take the following steps: * Move the handset and the base unit away from other electrical appliances. * Move closer to the base unit. * Raise the base unit antenna. * Turn on the clarity booster feature. * If connected to a telephone line with xDSL service, connect a noise filter between the base unit and the telephone line jack.
Why can't I listen to Panasonic KX-TG2431. Cordless Telephone messages remotely?
If you cannot listen to messages from a remote location on your Panasonic Cordless Telephone, a touch tone phone is required for remote operation. Press the remote code correctly and press each key firmly. The answering system may also be off; turn it on.
General| Type | Cordless Telephone |
|---|---|
| Frequency | 1.9 GHz |
| Number of Handsets | 1 |
| Handsets Supported | 6 |
| Range | Up to 1000 feet |
| Caller ID | Yes |
| Speakerphone | Yes |
| Battery Type | Ni-MH |
| Display | LCD |
| Call Waiting | Yes |
| Answering Machine | No |
| Intercom | Yes |
| Color Options | Black, Silver |
| Phonebook Capacity | 50 Names & Numbers |
