Sub-menu 1 Sub-menu 2 Settings Code
Message alert
– 1: <On> 0: Off #340 35
LCD contrast
(Display contrast)
– 1–6: Level 1–6 <3> #145 –
Key tone
*7
– 1: <On> 0: Off #165 –
Auto talk
*8
– 1: On 0: <Off> #200 13
Set tel line
Set dial mode
*1
1: Pulse
2: <Tone>
#120 11
Set flash time
*1, *9
0: 900 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
#121 14
Set line mode
*1, *10
1: A 2: <B> #122 –
C. WTG options
*1
(Call Waiting Deluxe
options)
1: On
0: <Off>
#215 28
Privacy mode
*1
– 1: On
0: <Off>
#194 15
Registration Register handset
– #130 26
Deregistration
*2
– #131 26
Change language Display
(Handset)
1: <English>
2: Français
#110 11
Voice prompt
*1
1: <English>
2: Français
#112 11
Main menu: “Customer support”
Operation Code
Displaying customer support Web address. #680 –
*1 If you program these settings using one of the handsets, you do not need to program the same item
using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Call
Display subscribers only)
To use this feature, set the date and time first (page 11).
22
Programming
To Next Page
Loading...
