Useful Information
27
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Busy L The called unit is in use.
L Other units are in use and the system is busy. Try
again later.
L The handset you are using is too far from the base
unit. Move closer and try again.
L There is no handset registered to the base unit
matching the handset number you entered.
No link to base.
Reconnect main
base AC adaptor.
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset’s registration may have been
cancelled. Re-register the handset (page 21).
TG401xC(e).book Page 27 Thursday, January 14, 2010 1:29 PM
To Next Page
Loading...
