Programming
19
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods.
■ Scrolling through the display menus
1 {MENU}
2 Press {V} or {^} to select the desired main menu. s {SELECT}
3 Press {V} or {^} to select the desired item from the next sub-menus. s {SELECT}
4 Press {V} or {^} to select the desired setting. s {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
■ Using the direct command
code
1 {MENU} s Enter the desired code.
Example: Press {MENU}(16).
2 Select the desired setting. s {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
L In the following table, + indicates the reference page number.
L Display menu order may vary depending on your model.
Display the menu tree and direct command code table
> Main menu: \ “Caller list” (Code: (213: page 27)
> Main menu: e “Answering device” (page 29)
Sub-menu 1 Sub-menu 2 Setting Code +
Play new msg.
(msg.: message)
––#323 30
Play all msg. ––#324 30
Erase all msg.
*1
––#325 31
Greeting Record
greeting
*1
– #302 29
Check greeting – #303 30
Pre-recorded
*1
(Reset to pre-
recorded greeting)
– #304 30
Settings Ring count
*1
<4 rings> #211 32
Recording time
*1
<3 min>
*2
#305 33
Remote code
*1
<111> #306 31
Screen call <On> #310 29
Answer on
*1
––#327 29
Answer off
*1
––#328 29
TG413x(e).book Page 19 Friday, September 24, 2010 8:45 AM
To Next Page
Loading...
