Useful Information
39
For assistance, please visit http://www.panasonic.com/help
Error messages
Display message Cause/solution
Base no power
or
No link. Re-connect base AC
adaptor.
L The handset has lost communication with the base
unit. Move closer to the base unit and try again.
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset’s registration may have been canceled.
Re-register the handset (page 25).
Busy L The called unit is in use.
L Other units are in use and the system is busy. Try
again later.
L The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for your
access #
L You have not stored the voice mail access number.
Store the number (page 34).
Check tel line L The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 9).
Error!! L Recording was too short. Try again.
Invalid L There is no handset registered to the base unit
matching the handset number you entered.
L The handset is not registered to the base unit.
Register the handset (page 25).
Requires subscription to
Caller ID.
L You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a
Caller ID service, this message will not be displayed.
Use rechargeable battery. L A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
TG413x(e).book Page 39 Friday, September 24, 2010 8:45 AM
To Next Page
Loading...
