Preparation
14 For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the base unit
Connecting the AC adaptor
Note:
L Use only the included Panasonic AC adaptor PQLV1.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a Panasonic
T-adaptor. Emergency power can be supplied to the unit by connecting a Panasonic
battery back-up power supply noted on page 10.
Fasten the AC adaptor cord.
Hook
AC adaptor
Raise the antennas.
Telephone line cord
To single-line telephone jack (RJ11C)
To power outlet (120 V AC, 60 Hz)
TG56XX.book Page 14 Tuesday, October 4, 2005 2:10 PM
To Next Page
Loading...
