Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 59
Troubleshooting
General use
Programmable settings
Problem Cause & solution
The unit does not work. L Make sure that the battery is installed correctly and fully
charged it (page 16).
L Check the connections (page 14).
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset has not been registered to the base unit.
Register the handset (page 52).
I cannot hear a dial tone. L Confirm that the telephone line cord is connected (page
15).
L Disconnect the unit from the telephone line and connect
a known working telephone. If the working telephone
operates properly, contact our service personnel to
have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.
Problem Cause & solution
I cannot program items. L While another user is listening to messages or the
answering system is answering a call, you cannot
program. Try again later.
While programming, the
handset starts to ring.
L A call is being received. Answer the call and start again
after hanging up.
TG56XX.book Page 59 Tuesday, October 4, 2005 2:10 PM
To Next Page
Loading...
