Making/Answering Calls
26 For assistance, please visit http://www.panasonic.com/phonehelp
Making calls
1 Lift the handset and dial the phone
number.
L To correct a digit, press {Clear}.
2 {C}/{Call}
3 When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L “Line in use” is displayed when
someone is talking on another handset
or another phone.
Using the speakerphone
1 During a conversation, press {s} to
turn on the speakerphone.
L Speak alternately with the other party.
2 When you finish talking, press {OFF}.
Note:
L Use the speakerphone in a quiet
environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver/speaker volume
Press {V} or {^} repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list.
1 {REDIAL}
2 Press {V} or {^} to select the desired
number.
L To erase the displayed number, press
{Erase}, then {Yes}.
3 {C}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1 {9} i {PAUSE} i Dial the phone
number.
2 {C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
TG56XX.book Page 26 Tuesday, October 4, 2005 2:10 PM
To Next Page
Loading...
