Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp 35
To activate this feature, you must edit an
item in the caller list, then call that number.
After that, phone numbers from that
caller’s area code are edited automatically.
This feature can be turned on or off (page
36). The default setting is “On”.
Note:
L Phone numbers from the 4 most recently
edited area codes are automatically
edited.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the area
codes you want to edit once again.
Storing caller information into
the phonebook
1 Press {V} or {^} to enter the caller list.
2 Select the desired item. i {Select}
L To edit the number, press {Edit}
repeatedly until the phone number is
shown in the desired format.
3 {Save}
4 Enter the name if necessary. (step 3,
“Adding items to the handset
phonebook”, page 29) i {Next} i
{Save} i {OFF}
Erasing caller information
Erasing a selected item
1 Press {V} or {^} to enter the caller list.
2 Select the desired item.
3 {Erase} i {Yes} i {OFF}
Erasing all items
1 Press {V} or {^} to enter the caller list.
2 {All erase} i {Yes}
TG56XX.book Page 35 Tuesday, October 4, 2005 2:10 PM
To Next Page
Loading...
