Programming
For assistance, please visit http://www.panasonic.com/phonehelp 37
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*2 KX-TG5631, KX-TG5632, KX-TG5633, KX-TG5634, KX-TG5651, KX-TG5652, and
KX-TG5653 only
*3 KX-TG5621, KX-TG5622, and KX-TG5623 only
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*5 The flash time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH}
fails to pick up the call waiting call.
*6 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
Ring color {1}{4}{1}: <Color1>=Amber
{2}: Color2=Yellow-green
{3}: Color3=Red
{4}: Multicolor
–
Ringer tone (Base unit)
*3
{0}{*}{1}{1}–{3}: Tone pattern <1>–
3
r
Ringer tone (Handset)
*4
{1}{2}{1}–{3}: Tone pattern <1>–
3
{4}–{7}: Melody pattern 1–
4
–
Ringer volume (Handset) {1}{1}{1}: Low {2}: Medium
{3}: <High> {0}: Off
–
Set dial mode {0}{5}{1}{1}: Pulse
{2}: <Tone> (page 24)
r
Set flash time
*5
{0}{5}{2}{1}: <700ms> {2}: 600ms
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
r
Set line mode
*6
{0}{5}{3}{1}: A {2}: <B> r
Time adjustment
*7
(Caller ID
subscribers only)
{0}{9}{1}: <Caller ID[auto]>
{0}: Manual
r
Voice enhancer {5}{1}: On {0}: <Off>–
Feature Feature
code
Setting code (Reference) 1 time
setting
TG56XX.book Page 37 Tuesday, October 4, 2005 2:10 PM
To Next Page
Loading...
