Panasonic KX-TG633SK

1 To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2 When finished, press MOFFN.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key Operation
MDN or MCN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
2 or MEN Skip message (during
playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MPAUSEN
Pause message
*1
9 or
MSTOPN
Stop recording
Stop playback
0 Turn answering system off
*4 Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 To resume playback:
MbN: “Playback” a MSELECTN
Calling back (Caller ID subscribers
only)
1 Press MPAUSEN during playback.
2 MbN: “Call back” a MSELECTN
Remote operation
You can use a touch-tone phone to call the
unit while away from home and listen to
messages.
Remote access code
For security, a 3-digit remote access code
must be entered when operating the
answering system remotely. The default
setting is “111”.
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1 MMENUN#306
2 Enter the desired 3-digit remote access
code.
R To deactivate remote operation, press
*.
3 MSAVEN a MOFFN
Using the answering system
remotely
1 Dial your phone number from a
touch-tone phone.
2 After the greeting message starts, enter
your remote access code.
3 Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 26).
4 When finished, hang up.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
For assistance, please visit http://shop.panasonic.com/support
25
Answering System