17
KX-TG6511BXB/KX-TG6512BXB/KX-TG6513BXB/KX-TG6519BXB/KX-TGA651BXB
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) Refer to Registering a Handset to a Base Unit in the Operating Instructions.
(*2) When you enter the address or New Data, please refer to the table below.
(*3)
Items Address Default Data New Data Remarks
C-ID (FSK) sensitivity 04 8B 00 01 (6 dB up) 02 (12 dB up) When hex changes from “00” to “01” or “02”,
gain increases by 6 dB or 12 dB.
C-ID (DTMF) sensitivity 00 0A 30 60 (6 dB up) 70 (12 dB up) When hex changes from “50” to “60” or “70”,
gain increases by 6 dB or 12 dB.
Frequency 00 08/00 07 02/70 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 02~00 06 Given value - -
Bell length 02 18 64 (10sec) (*3) 1E (3 sec) 14 (2 sec) This is time until bell stops ringing.
(Unit: 100 ms)
PULSE Dial speed
(10PPS -> 20PPS)
01 F8 28 (40msec)
(*3)
19 (20msec) - This is pulse make time. (Unit:1 ms)
01 F9 3C (60msec)
(*3)
19 (30msec) - This is pulse break time. (Unit:1 ms)
02 07 57 (870msec)
(*3)
2C (440msec) - This is inter-digit time in pulse mode.
(Unit:10 ms)
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
00 A[R] + 0
11 B[R] + 1
.. C[R] + 2
.. D[R] + 3
.. E[R] + 4
99 F[R] + 5
Bell length 64(hex) = 100(dec) → 100 × 100 msec = 10000 msec (10 sec)
PULSE Dial speed
(10PPS -> 20PPS)
28(hex) = 40(dec) → 40 × 1msec = 40msec
3C(hex) = 60(dec) → 60 × 1msec = 60msec
57(hex) = 87(dec) → 87 × 10msec = 870msec
To Next Page
Loading...
