78
KX-TG6511RU/KX-TG6512RU/KX-TGA650RU/KX-TGA651RU
15.5. Replacement Part List
1. RTL (Retention Time Limited)
Note:
The “RTL” marking indicates that its Retention Time is
Limited.
When production is discontinued, this item will
continue to be available only for a specific period of
time. This period of time depends on the type of item,
and the local laws governing parts and product
retention.
At the end of this period, the item will no longer be
available.
2. Important safety notice
Components identified by the mark indicates special
characteristics important for safety. When replacing any
of these components, only use specified manufacture’s
parts.
3. The S mark means the part is one of some identical parts.
For that reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column
shows quality of the material and a flame resisting grade
about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (Ω) k=1000 Ω, M=1000 kΩ
All capacitors are in MICRO FARADS (μF)p=μμF
*Type & Wattage of Resistor
15.5.1. Base Unit
15.5.1.1. Cabinet and Electrical Parts
15.5.1.2. Main P.C.Board Parts
Note:
(*1) When replacing IC7, IC401 or X1, make the adjustment
using PNZZTG6511RU. Refer to How to download the
data (P.54) of Things to Do after Replacing IC or X'tal.
(*2) When removing E1, use special tools (ex. Hot air
disordering tool).
(*3) Backside of this IC has a ground plate.
(*4) Supplied IC is Flat Package Type.
Safety Ref.
No.
Part No. Part Name & Description Remarks
1 PNKM1127Z1 CABINET BODY (for KX-
TG6511RUB)
PS-HB
1 PNKM1127Z6 CABINET BODY (for KX-
TG6511RUT)
PS-HB
1 PNKM1127Y2 CABINET BODY (for KX-
TG6511RUM)
PS-HB
2 PNKE1055Z1 CASE, CHARGE TERMINAL
(for KX-TG6511RUB)(for
KX-TG6511RUT)
PS-HB
2 PNKE1055Z2 CASE, CHARGE TERMINAL
(for KX-TG6511RUM)
PS-HB
3 PNBC1302Z1 BUTTON, LOCATOR (for
KX-TG6511RUB)(for KX-
TG6511RUT)
ABS-HB
3 PNBC1302Y4 BUTTON, LOCATOR (for
KX-TG6511RUM)
ABS-HB
4 K2ECYZ000001 JACK, DC
5 PQJJ1T039Y JACK, MODULAR
6 PNJT1003Z CHARGE TERMINAL
7 PNLA1030Z ANTENNA
8 PNYE1009Z SPACER, ANTENNA
9 PNKF1095Z1 CABINET COVER PS-HB
10 PNHA1014Z RUBBER PARTS,FOOT CUSH-
ION
11 PNHA1013Z RUBBER PARTS,FOOT CUSH-
ION
Safety Ref.
No.
Part No. Part Name & Description Remarks
PCB1 PNWPG6511RUH MAIN P.C.BOARD ASS'Y
(RTL)
(ICs)
IC3 C0DBAGZ00026 IC
IC7 C1CB00002906 IC (BBIC(FLASH))
(*1)(*3)(*4)
IC401 PNWITG6511EH IC (EEPROM) (*1)
IC801 C1CB00001842 IC (*3)
(TRANSISTORS)
IC2 B1ZBZ0000065 TRANSISTOR(SI)
Q2 B1ABCE000009 TRANSISTOR(SI)
Q3 B1ACGP000007 TRANSISTOR(SI)
Q4 PQVTBF822T7 TRANSISTOR(SI)
Q5 2SD0874AS TRANSISTOR(SI)
Q8 B1ADGE000004 TRANSISTOR(SI)
Q9 B1ADGE000004 TRANSISTOR(SI)
Q10 UNR92A6J0L TRANSISTOR(SI)
Q24 UN9219J TRANSISTOR(SI) S
Q25 UN9219J TRANSISTOR(SI) S
(DIODES)
D3 B0EDER000009 DIODE(SI)
D10 MA8033 DIODE(SI) S
D21 PQVDRLZ20A DIODE(SI) S
DA801 B0DDCD000001 DIODE(SI)
DA802 B0DDCD000001 DIODE(SI)
(COILS)
L1 PQLQXF330K COIL S
L2 PQLQXF330K COIL S
L3 G1C220M00037 COIL S
L801 G1C27NJ00010 COIL
L802 G1C3N0ZA0063 COIL
L803 G1C3N0ZA0063 COIL
(RESISTOR ARRAYS)
RA1 D1H810240004 RESISTOR ARRAY S
RA402 D1H410320002 RESISTOR ARRAY
RA80 D1H422120001 RESISTOR ARRAY
(VARISTOR)
SA1 J0LF00000026 VARISTOR (SURGE
ABSORBER)
(RESISTORS)
R3 PQ4R10XJ184 180k S
R4 PQ4R10XJ105 1M S
R5 PQ4R10XJ184 180k S
R6 PQ4R10XJ105 1M S
R8 ERJ3GEYJ104 100k S
Safety Ref.
No.
Part No. Part Name & Description Remarks
To Next Page
Loading...
