38
KX-TG6572C/KX-TG6572R/KX-TGA653C/KX-TGA653R
10.1.5.2. Handset
Cross Reference:
Power Supply Circuit/Reset Circuit (P.20)
Check the RF part (P.39)
Note:
*1 How to adjust +3.0V:
Execute the command "VDA"
Refer to Things to Do after Replacing IC or X'tal (P.58) for Handset.
*2 How to adjust the frequency of X1:
To see the frequency, execute the command “SFR“, then check the TP_CKM (IC1-57pin).
To adjust frequency, send command “SFR “until the frequency counter becomes13.824 MHz±55HZ.
To Next Page
Loading...
