Panasonic KX-TG6671B

43
KX-TG6671B/KX-TG6672B/KX-TGA660B
10.1.9. Check Portable Transmission
Cross Reference:
Signal Route (P.22)
10.1.10. Check Portable Reception
Cross Reference:
Signal Route (P.22)
Note:
When checking the RF part, Refer to Check the RF part
(P.38).
10.1.11. Check Caller ID
Cross Reference:
Telephone Line Interface (P.13)
Calling Line Identification (Caller ID)/Call Waiting Caller
ID (P.15)
Note:
• Make sure the format of the Caller ID service of the
Telephone company that the customer subscribes to.
• It is also recommended to confirm that the customer is really
a subscriber of the service.
10.1.12. Check SP-phone Transmission
Cross Reference:
Signal Route (P.22)
10.1.13. Check SP-phone Reception
Cross Reference:
Signal Route (P.22)
10.1.14. Check Corded Handset
Transmission
Cross Reference:
Signal Route (P.22)
10.1.15. Check Corded Handset Reception
Cross Reference:
Signal Route (P.22)
Check MIC of portable.
Check portable Tx in Signal Route.
Check speaker of portable.
Check portable Rx in Signal Route.
YES
Did bell ring?
(Message indicator
blinks)
Check Calling Line Identification (Caller ID)/
Call Waiting Caller ID.
Check bell signal detection in
Telephone Line Interface.
BASE UNIT
NO
OK
Check MIC of Base Unit.
Check SP-phone TX (Base Unit) in Signal Route.
OK
Check Speaker of Base Unit.
Check SP-phone RX (Base Unit) in Signal Route.
OK
Check (Corded) Handset.
Check (Corded) Handset TX in Signal Route.
OK
Check (Corded) Handset.
Check (Corded) Handset RX in Signal Route.