– 5 –
Answering system (Base unit)
Feature Operation
Auto answer on/off 1 Press {LINE SELECT} repeatedly to select the desired
line(s).
2 {ANSWER ON}
Recording your greeting
message
(max. 2 minutes)
1 Press {LINE SELECT} repeatedly to select the desired
line(s).
2 {GREETING REC}
3 Within 10 seconds, press {GREETING REC} again.
4 Speak clearly about 20 cm (8 inches) away from the MIC.
5 To stop recording, press {STOP}.
Listening to new
messages
When the {MESSAGE} button flashes on the base unit,
press {MESSAGE}.
Listening to old
messages
When the {MESSAGE} button does not flash on the base
unit, press {MESSAGE}.
Erasing a message Press {ERASE} during playback.
Using the answering
system remotely
1 Dial your phone number from a touch tone phone.
2 After the greeting message starts, enter your remote
code. (Default remote code is “11”.)
L The unit plays back new messages including memo
messages.
L
After playing back new messages, the voice guidance starts.
3 Follow the voice guidance as necessary.
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
TG6700_QG(e).fm Page 5 Monday, August 18, 2008 12:10 PM
To Next Page
Loading...
