Main menu: “K
ey Finder”
*8
Sub-menu 1 Sub-menu 2 Settings Code
Search
– – #655 –
Battery Check
– –
Main menu: “R
inger Setup”
*16,
*17
Sub-menu 1 Sub-menu 2 Settings Code
Ringer Volume Handset
0-6: O
ff-6 <6> #160 19
Base Unit
*
1,
*2
0-6: O
ff-6 <3> #G160 –
Ringtone
*
5, *6
(Handset)
– <R
ingtone 1> #161 –
Night Mode On/Off
1: O
n 0: <Off> #238 30
Start/End
<23:00/06:00> #237 30
Ring Delay
1: 3
0 sec.
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
#239 30
First Ring
*
2,
*7
– 1:
<On> 0: Off #173 –
Main menu: “N
uisance Call Block”
*2, *18
Sub-menu 1 Sub-menu 2 Settings Code
Single Number
– – #217 30
Range of Numbers
– –
Withheld
–
On
<O
ff>
#240 31
*1 KX-TG6821 series: page 3
*
2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
28
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
To Next Page
Loading...
