EasyManua.ls Logo

Panasonic KX-TG6811 Series - Special Programming: Alarm; Setting and Customizing Alarms

Panasonic KX-TG6811 Series
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can only remove the first ring if the unit rings 2 times or more by default, which depends
o
n your service provider/telephone company.
*8 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
guide for more information on the key finder.
*9 For models with supplied key finders, the display shows 1: Finder1.
*10 If you register 2 or more key finders.
*11 If you have 2 or more key finders.
*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*15 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*16 KX-TG6811 series: page 3
*17 KX-TG6821 series (including KX-TG6891): this menu icon is displayed when the key finder
is not registered.
*18 KX-TG6811 series: this menu icon is displayed when the key finder is not registered.
Special programming
Alarm
A
n alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 16).
1 M
N#720
2 S
elect an alarm by pressing 1 to 3. a
MOKN
3 MbN: Select the desired alarm option. a
MOKN
O
ff
Turns alarm off. Go to step 9.
O
nce
An alarm sounds once at the set time.
D
aily
An alarm sounds daily at the set time.
Go to step 5.
W
eekly
Alarm sounds weekly at the set time(s).
4 P
roceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M
N.
a MOKN
5 Set the desired time. a MOKN
6 Enter a text memo (10 characters max.;
page 45). a MOKN
7 MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MbN: Select the desired snooze setting.
a MOKN
9 MOKN a MeN
R When the alarm is set,
is displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
29
Programming
TG68xxE(en)_WA_0630_ver310.pdf 29 2014/06/30 9:57:07

Related product manuals