Intercom
Intercom calls can be made between
handsets.
Note:
R When paging the handset, the paged
handset beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press MeN, then press
M N.
Making an intercom call
1 M
N a M N
2 MbN: Select the desired unit. a MOKN
R To stop paging, press MeN.
3 When you finish talking, press MeN.
Answering an intercom call
1 Press M
N to answer the page.
2 When you finish talking, press MeN.
Using the Smart Function Key
Press M
N to answer the page.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit: Press M
N.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit: Press M
N.
Handset: Press MeN.
Using the Smart Function Key
You can also stop paging by pressing M N.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1 During an outside call, press M
N to put
the call on hold.
2 MbN: “Intercom” a MOKN
3 MbN: Select the desired unit. a MOKN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N to return to the outside call.
5 To complete the transfer:
Press MeN.
R The outside call is being routed to the
destination unit.
To establish a conference call:
M
N a MbN: “Conference” a MOKN
R To leave the conference, press
MeN. The other 2 parties can
continue the conversation.
R To put the outside call on hold: M
N
a MbN: “Hold” a MOKN
To resume the conference: M
N a
MbN: “Conference” a MOKN
R To cancel the conference: M
N a
MbN: “Stop Conference” a MOKN
You can continue the conversation
with the outside caller.
Answering a transferred call
Press M
N to answer the page.
Using the Smart Function Key
Press M N to answer the page.
44
Intercom/Locator
To Next Page
Loading...
