Panasonic KX-TG6841 - Getting Started; Initial Setup and Connections

Setting up
Connections
n
Base unit
R Use only the supplied Panasonic AC
adaptor PNLV226.
Correct
Incorrect
To power outlet
Press plug firmly.
Hook
“Click”
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter*
“Click”
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
n Charger
To power outlet
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities ( , ).
Rechargeable Ni-MH ONLY
R W
hen the date and time setting is
displayed, see page 14.
Battery charging
C
harge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
10
For assistance, please visit http://www.panasonic.com/help
Getting Started
TG684x7x(en)_1127_ver021.pdf 10 2012/11/27 18:16:45