– 2 –
Battery installation/Battery charge
Initial charge: 7 hours
Note:
LUSE ONLY rechargeable Ni-MH batteries.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Operating tips
Using the navigator key
Press {^}, {V}, {<}, or {>} to navigate
through menus and to select items shown
on the display.
Adjusting the receiver or speaker
volume (?)
Press {^} or {V} while on a call.
Display language
16 display languages are available.
You can select “Deutsch”, “English”, “Magyar”, “Polski”, “SlovenČina”,
“ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”,
“LatvieŠu”, “Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqip”.
1 {ih} i {j/OK}
2 Press {^} or {V} to select “Handset Setup”. i {>}
3 Press {^} or {V} to select “Display Setup”. i {>}
4 Press {^} or {V} to select “Select Language”. i {>}
5 Press {^} or {V} to select the desired language. i {>} i {ih}
Base unit
*1
Charger
*2
*1 The pictured model is KX-TG7200.
*2 KX-TG7202
Rechargeable
Ni-MH ONLY
“Charging” will
be displayed.
{V}
{^}
{<}{>}
TG7200_7220FX(e-e)_QG.fm Page 2 Thursday, June 21, 2007 5:10 PM