– 6 –
What do I need to do to
display caller information?
LYou need to subscribe to Caller ID service.
Consult your service provider/telephone company
for details.
LThe message “You must first subscribe
to Caller ID.” will be displayed until you
receive caller information after subscribing to
Caller ID service.
What should I do when:
– I hear static or sound cuts
in and out?
– there is interference from
other electrical units?
LPlace the handset and the base unit away from
other electrical appliances.
LMove closer to the base unit.
LYour unit is connected to a telephone line with
DSL service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
What should I do when the
operating time seems to be
short even after I fully
charged the batteries?
LWipe the battery ends (S, T) and the unit
contacts with a dry cloth.
What do I need to do to
erase the missed call
number (for example,
“3 Calls”) from the
display?
LThere are unviewed missed calls remaining. View
them using the following method.
1 {j/OK}
2 {^}/{V}: “Caller List” i {>}
3 Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
Frequently asked questions
Question Cause & solution
TG7200_7220FX(e-e)_QG.fm Page 6 Thursday, June 21, 2007 5:10 PM
To Next Page
Loading...
