To Next PageTo Next PageWhy can't I register a handset to a base unit on my Panasonic KX-TG7301NZ Cordless Telephone?
The maximum number of handsets (6) may already be registered to the base unit, so cancel unused handset registrations from the base unit. Place the handset and the base unit away from other electrical appliances.
What to do if I fully charged the batteries, but the operating time seems shorter on my Panasonic KX-TG7301NZ Cordless Telephone?
Clean the battery ends and the charge contacts with a dry cloth, and charge again.
What to do if my Panasonic KX-TG7301NZ does not record new messages?
First, ensure the answering system is turned on. If it is, the message memory might be full, so erase unnecessary messages. Also, check if the recording time is set to “Greeting Only” and change the setting if needed.
What to do if the Panasonic KX-TG7301NZ does not record new messages?
Check if the answering system is turned off and turn it on. The message memory might be full, so erase unnecessary messages. Also, verify the recording time isn't set to “Greeting Only” and change the setting if needed.
What causes time shift on my Panasonic KX-TG7301NZ Cordless Telephone?
Incorrect time information from incoming Caller ID may change the time. Set the time adjustment to off.
What to do if I cannot operate the answering system remotely on my Panasonic Cordless Telephone?
You might be entering the wrong remote access code. Press each key firmly. The answering system might be turned off, so turn it on. If you are using a rotary/pulse telephone, try again using a touch-tone phone.
What to do if I cannot make a call on my Panasonic KX-TG7301NZ Cordless Telephone?
Ensure the handset is close enough to the base unit. Another unit might be in use, or the answering system may be active, so wait and try again. If you're using a BT double adaptor, remove it and connect directly to the wall socket. Also, check if the key lock feature is on and turn it off if it is. Note that the unit is not designed for rotary/pulse dialling services.
What to do if the handset display is blank on my Panasonic Cordless Telephone?
The handset may not be turned on. Turn the power on.
What to do if the Panasonic KX-TG7301NZ handset does not ring?
The ringer volume may be turned off. Adjust the ringer volume.
Why does my Panasonic Cordless Telephone handset beep and/or flash 3 times?
This indicates that the battery charge is low. Fully charge the batteries.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG7301NZ |
| Type | Cordless Telephone |
| Answering System | Yes |
| Speakerphone | Yes |
| Caller ID | Yes |
| Display | LCD |
| Battery Type | Ni-MH |
| Talk Time | Up to 17 hours |
| Number of Handsets | 1 |
| Call Waiting | Yes |
| Intercom | Yes |
| Power Source | AC adapter |
| Technology | DECT |
| Phonebook Capacity | 50 |
| Memory | 50 names and numbers |
| Range | Up to 300 meters outdoors |
