A
Amanda HarrisAug 25, 2025
Why does my Panasonic Cordless Telephone handset beep and/or flash 3 times?
- AAngela RothAug 26, 2025
This indicates that the battery charge is low. Fully charge the batteries.
To Next PageTo Next PageWhy does my Panasonic Cordless Telephone handset beep and/or flash 3 times?
This indicates that the battery charge is low. Fully charge the batteries.
What to do if the Panasonic KX-TG7301NZ handset does not ring?
The ringer volume may be turned off. Adjust the ringer volume.
What to do if the handset display is blank on my Panasonic Cordless Telephone?
The handset may not be turned on. Turn the power on.
What to do if I cannot make a call on my Panasonic KX-TG7301NZ Cordless Telephone?
Ensure the handset is close enough to the base unit. Another unit might be in use, or the answering system may be active, so wait and try again. If you're using a BT double adaptor, remove it and connect directly to the wall socket. Also, check if the key lock feature is on and turn it off if it is. Note that the unit is not designed for rotary/pulse dialling services.
Why does my Panasonic Cordless Telephone beep and/or flash 3 times?
This usually means the battery charge is low. Fully charge the batteries.
Why is there noise and sound cutting in and out on my Panasonic Cordless Telephone?
This issue often occurs when the handset or base unit is in an area with high electrical interference, so move them away from such sources. Also, try moving closer to the base unit.
What to do if caller information is not displayed on my Panasonic KX-TG7301NZ?
If your unit is connected to any additional telephone equipment, remove it and plug the unit directly into the wall socket. Also, other telephone equipment such as a monitored Burglar Alarm or the modem in the SKY Digital decoder may be interfering with this unit. Disconnect the other equipment and try again.
What to do if my Panasonic KX-TG7301NZ does not work?
First, ensure the batteries are correctly installed and fully charged. Check all connections. If it still fails, unplug the base unit’s AC adaptor to reset the unit and turn off the handset, then reconnect and try again. The handset may not be registered to the base unit. In this case, register the handset.
What to do if I fully charged the batteries, but 3 still flashes on Panasonic KX-TG7301NZ Cordless Telephone?
Clean the charge contacts and charge again. If the issue persists, it may be time to replace the batteries.
Why can't I register a handset to a base unit on my Panasonic KX-TG7301NZ Cordless Telephone?
The maximum number of handsets (6) may already be registered to the base unit, so cancel unused handset registrations from the base unit. Place the handset and the base unit away from other electrical appliances.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG7301NZ |
| Type | Cordless Telephone |
| Answering System | Yes |
| Speakerphone | Yes |
| Caller ID | Yes |
| Display | LCD |
| Battery Type | Ni-MH |
| Talk Time | Up to 17 hours |
| Number of Handsets | 1 |
| Call Waiting | Yes |
| Intercom | Yes |
| Power Source | AC adapter |
| Technology | DECT |
| Phonebook Capacity | 50 |
| Memory | 50 names and numbers |
| Range | Up to 300 meters outdoors |
