Preparation
12
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Dialling mode (tone/pulse)
Change the dialling mode depending on your
telephone line service.
“Tone”: Select when you have a touch-tone
service.
“Pulse”: Select when you have rotary/pulse
service.
1 {MENU} (right soft key)
2 Select h by pressing {^}, {V}, {<}, or {>}.
i {OK}
3 Enter the base unit PIN (default: “0000”). i
{OK}
L If you forget your PIN, consult your nearest
Panasonic service centre.
4 Press {^} or {V} to select “Call Options”.
i {OK}
5 Press {^} or {V} to select “Dial Mode”. i
{OK}
6 Press {^} or {V} to select the desired setting.
i {OK} i {i}
Date and time
1
{MENU} (right soft key)
2 Select r by pressing {^}, {V}, {<}, or {> }.
i {OK}
3 Press {^} or {V} to select
“Set Date & Time”. i {OK}
4 Enter the current date, month, and year. i
{OK}
Example: 17 May, 2007
{1}{7} {0}{5} {0}{7}
L You can select the format by pressing {#}:
– mm-dd-yy (month-date-year)
– yy-mm-dd
– yy-dd-mm
– dd-mm-yy
5 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30PM” is displayed.
6 {OK} i {i}
Note:
L To correct a digit, press {<} or {>} to move the
cursor to the digit, then make the correction.
L The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
L If you set the date and time with handset 1,
press {C} and {i} on another handset to
show the time on that handset (KX-TG8092/
KX-TG8093).
TG8070-8090E(e).book Page 12 Monday, June 11, 2007 8:12 PM
To Next Page
Loading...
