To Next PageTo Next PageWhy is the battery icon not changing when the batteries should be charging on my Panasonic KX-TG8200E Cordless Telephone?
If the battery icon does not change when the batteries should be charging on your Panasonic Cordless Telephone, clean the charge contacts and charge again.
What does it mean when I hear static or the sound cuts in and out on my Panasonic KX-TG8200E?
If you are experiencing static or the sound cuts in and out on your Panasonic Cordless Telephone: * It could be interference from other electrical units. Place the handset and the base unit away from other electrical appliances. * Move closer to the base unit. * Your unit might be connected to a telephone line with DSL service.
What to do if my Panasonic KX-TG8200E will not turn on?
If your Panasonic Cordless Telephone will not turn on: * Ensure the batteries are installed correctly. * Fully charge the batteries. * Clean the charge contacts and charge again.
What to do if my Panasonic Cordless Telephone handset display is blank?
If the handset display is blank on your Panasonic Cordless Telephone: * The handset may be in screen saver mode. Press {ih} to activate the display. * The handset might not be turned on. Turn the power on.
What to do if I cannot make or receive calls on my Panasonic KX-TG8200E Cordless Telephone?
If you are unable to make or receive calls on your Panasonic Cordless Telephone, consider the following: * Check the base unit AC adaptor and telephone line cord connections. * If using a splitter, remove it and connect the unit directly to the wall socket to test the splitter. * Disconnect the base unit and connect the telephone line to a working telephone to determine if the issue is with the unit or the telephone line. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company. * Ensure you are not dialling a restricted number. * Check if the key lock feature is turned on, and if so, turn it off.
What does it mean when a busy tone is heard when {C} is pressed on my Panasonic KX-TG8200E?
If you hear a busy tone when {C} is pressed on your Panasonic Cordless Telephone: * The handset may be too far from the base unit. Move closer and try again. * Another handset might be in use, or the answering system is being used. Wait and try again later.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG8200E |
| Category | Cordless Telephone |
| Language | English |
