Panasonic KX-TG9333

Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Busy
or
System is busy. Please
try again later.
Check tel line
Don't use this battery.
Error! !
Insert battery
Invalid
No link to base.
Reconnect AC adaptor.
Phonebook full
Store VM access#
• The called handset or base unit is in use.
• Other units are
in use and the system is busy.
Try again later.
• The handset you are using is too far from the
base unit. Move closer and try again.
• The handset's registration may have been
canceled. Re-register the handset (page 30).
• The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 12).
• A wrong type
of batteries such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted
on page
6,13.
• The handset's registration has failed. Move
the handset and base unit away from all
electrical appliances and try again.
• The handset was placed
on the base unit or
charger without batteries. Insert the batteries
properly (page 13).
• There
is no handset registered to the base
unit matching the handset number you
entered.
• The handset
is not registered to the base unit.
Register the handset (page 30).
• The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
• Unplug the base unit's AC adaptor to reset the
unit. Reconnect the adaptor and try again.
• The handset's registration may have been
canceled. Re-register the handset (page 30).
• The phonebook memory
is full. Erase
unnecessary entries (page 22).
•
You have not stored the voice mail access
number. Store the number (page 40).
46 For assistance, please visit http://www.panasonic.com/help