Getting started
12
For assistance, please visit http://www.panasonic.com/help
Battery installation
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Note:
L Use the supplied rechargeable batteries. For
replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
L Wipe the battery ends (S, T) with a dry cloth.
L Avoid touching the battery ends (S, T) or the
unit contacts.
L If the handset does not automatically turn on
after installing/replacing batteries, place the
handset on the base unit or charger.
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged, “Charge
completed” is displayed.
Note:
L It is normal for the handset to feel warm during
charging.
L Clean the charge contacts of the handset, base
unit, and charger with a soft and dry cloth once a
month. Clean more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Note:
L The batteries need to be charged if the handset
beeps while you are engaged in a call or
operating the answering system remotely.
Rechargeable Ni-MH ONLY
Icon Battery level
1 High
2 Medium
3 Low
034 Needs charging.
4 Empty
Confirm “Charging”
is displayed.
TG938x(e).book Page 12 Friday, July 3, 2009 10:10 AM
To Next Page
Loading...
