Answering System
41
For assistance, please visit http://www.panasonic.com/help
Remote commands
You can press dial keys to access certain
answering system functions without waiting for the
voice guidance to prompt you.
1 Select the desired line(s) while you are
accessing the answering system if necessary.
For line 1: {#}{1}
For line 2: {#}{2}
For line 1 and line 2: {#}{0}
2 Press the desired dial keys.
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 For English voice guidance only:
To resume operation, enter a remote command
within 3 seconds, or the voice guidance starts.
*3 For Spanish voice guidance only
*4 Unit resets to a pre-recorded greeting message.
Turning on the answering system
remotely
If the answering system is turned off, you can turn
it on remotely.
Important:
L The answering system can be remotely turned
on only for the line which you have currently
selected in “Turning the answering system
on/off”, page 37.
1 Dial your phone number from a touch-tone
phone.
2 Let the phone ring 15 times.
3 Enter your remote access code after the beep.
L The greeting message is played back.
L You can either hang up, or enter your
remote access code again and begin
remote operation (page 40).
Note:
L If you want to turn on the answering system for
the line which has not been selected in “Turning
the answering system on/off”, page 37, enter the
desired remote commands, {#}{1}{8},
{#}{2}{8}, or {#}{0}{8} (refer to the column to
the left) to turn on and access the other line.
Key Operation
{1} Repeat message (during
playback)
*1
{2} Skip message (during
playback)
{4} Play new messages
{5} Play all messages
{6} Play greeting message
{#}{1}{7} Record a greeting message
for line 1 only
{#}{2}{7} Record a greeting message
for line 2 only
{#}{0}{7} Record a common greeting
message for both line 1 and
line 2
{#}{1}{8} Turn answering system on
for line 1 only
{#}{2}{8} Turn answering system on
for line 2 only
{#}{0}{8} Turn answering system on
for both line 1 and line 2
{9} Stop recording
Stop playback
*2
Start voice guidance
*3
{0} Turn answering system off
{*}{4} Erase currently playing
message
{*}{5} Erase all messages
{*}{6} Erase greeting message
(during greeting message
playback)
*4
{*}{#} End remote operation (or
hang up)
TG938x(e).book Page 41 Friday, July 3, 2009 10:10 AM
To Next Page
Loading...
