Sub-menu 1 Sub-menu 2 Settings Code Unit
Registration HS registration
(HS: Handset)
– #130 32
Deregistration
– #131 32
Change language Display language
<English>
Français
#110
/
15
Voice prompt
*1
<English>
Français
#112
/
15
Main menu: “Customer support”
*12
Operation Code Unit
Displaying customer support Web address. #680
/
–
*1 If you program these settings using one of the handsets, you do not need to program the same item
using another handset.
*2 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*3 If you subscribe to a distinctive ring service, select a tone (base unit: tone 1 to 3/handset: tone 1 to
5). If you select a melody, you cannot distinguish lines by their ringers.
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds
even if the caller has already hung up. You may either hear a dial tone or no one on the line when
you answer the call.
*5 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*6 This tone lets you know when you receive an outside call while you are on the other line or an
intercom call. If you select “On”, the tone sounds 2 times.
*7 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select “Caller ID[auto]”. To turn this feature off, select “Manual”. (Call
Display subscribers only)
To use this feature, set the date and time first (page 14).
*8 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys,
including confirmation tones and error tones.
*9 If you subscribe to a Call Display service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
*11 Generally, the line mode setting should not be changed. If the LINE 1 indicator or LINE 2 indicator
does not light when another phone connected to the same line is in use, you need to change the line
mode to “A”.
*12 The base unit and handset can display the Internet address where you can download the operating
instructions or get further information for this product, using your computer.
30
Programming
To Next Page
Loading...
