Panasonic KX-TG9471C - Useful Information; Wall Mounting Instructions

Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing method
are strong enough to support the weight of the
unit.
Base unit
1 To remove the wall mounting adaptor, push
down the release levers (A). Remove the
adaptor (B).
A
B
B
A
2 A Turn the adaptor so that the words “UP
WALL” are facing up.
B Tuck the telephone line cord inside the wall
mounting adaptor.
C Connect the AC adaptor cord and
telephone line cord.
3
1
2
3 Insert the lower tabs of the adaptor into the
unit’s bottom slots (A), then insert by pushing
down the levers of the adaptor into the upper
slots(B).
R The words “UP WALL” should be facing up.
A
B
A
B
4 Mount the unit on a wall then slide down to
secure in place.
Wall phone plate
Charger
Drive the screws (not supplied) into the wall.
25.4 mm
(1 inch)
Screws
Hooks
45
Useful Information