Panasonic KX-TG9471C - Storing Caller Information to Phonebook

– If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another unit.
R In step 2, if is displayed, not all of the
information is shown. To see the remaining
information:
Base unit:
Press M N. To return to the previous screen,
press M N.
Handset:
Press MEN. To return to the previous screen,
press MFN.
R In step 3, the unit automatically uses the line
you set in line selection mode (page 15) to call
back. When the line selection mode is set to
“Auto”, the indicated line ( or ) is used for
the call. If the indicated line is already being
used or you want to select the other line:
Base unit: Press MLINE 1N or MLINE 2N, then lift
the corded handset.
Handset: Press MCALLN, then press MLINE 1N
or MLINE 2N.
Editing a caller’s phone number
before calling back
You can edit a phone number in the caller list by
adding the long distance code “1” or removing its
area code.
Base unit / Handset
1 Proceed with the operation for your unit.
Base unit: MCIDN
Handset: MMENUN#213
2 Proceed with the operation for your unit.
Base unit: MbN: Select the desired entry.
Handset: MbN: Select the desired entry. a
MCALLN
3 Press MEDITN repeatedly until the phone
number is shown in the desired format.
A
B
C
1 – Area code – Local phone number
Example: 1-555-321-5555
Local phone number
Example: 321-5555
Area code – Local phone number
Example: 555-321-5555
4 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: M N
R If the indicated line is already being used or
you want to select the other line:
Base unit: Press MLINE 1N or MLINE 2N,
then lift the corded handset.
Handset: Press MLINE 1N or MLINE 2N.
Note:
R The number edited in step 3 will not be saved in
the caller list.
Erasing selected caller information
Base unit / Handset
1 Proceed with the operation for your unit.
Base unit: MCIDN
Handset: MMENUN#213
2 MbN: Select the desired entry.
3 MERASEN (soft key) a MbN: “Yes” a
MSELECTN
4 Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Erasing all caller information
Base unit / Handset
1 Proceed with the operation for your unit.
Base unit: MCIDN
Handset: MMENUN#213
2 MERASEN (soft key) a MbN: “Yes” a
MSELECTN
3 Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Storing caller information to the
phonebook
Base unit / Handset
1 Proceed with the operation for your unit.
Base unit: MCIDN
Handset: MMENUN#213
2 Proceed with the operation for your unit.
Base unit: MbN: Select the desired entry.
Handset: MbN: Select the desired entry. a
MSAVEN
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the desired format.
34
Call Display Service