Panasonic KX-TG9541

Battery installation
R USE ONLY Ni-MH batteries AAA (R03) size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
Rechargeable Ni-MH ONLY
R Follow the directions on the display to set up
the unit.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged, “Fully
charged” is displayed.
Confirm “Charging” is displayed.
Note when setting up
Note for connections
R The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
Note for battery installation
R Use the supplied rechargeable batteries. For
replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
Note for battery charging
R It is normal for the handset to feel warm during
charging.
R Clean the charge contacts of the handset, base
unit, and charger with a soft and dry cloth once
a month. Before cleaning the unit, disconnect
from power outlets and any telephone line
cords. Clean more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance
(supplied batteries)
Operation Operating time
In continuous use
15 hours max.
*1
Not in use (standby)
170 hours max.
*1
*1 If eco mode is on.
Note:
R Actual battery performance depends on usage
and ambient environment.
For assistance, please visit http://www.panasonic.com/help
11
Getting Started
TG954x(en)_0528_ver011.pdf 11 2013/05/28 11:09:51