Item Meaning
– The cellular line is selected for
the setting.
– A cellular call is being received
on that line.
Noise reduction is set. (page 24)
Equalizer is set. (page 24)
Z Speakerphone is on. (page 22)
Ringer volume is off.
*4
(page 23, 39)
Silent mode is on. (page 44)
Call sharing mode is off.
(page 42)
Alarm is on. (page 43)
Handset number
Battery level
Blocked call (page 44)
In use:
Someone is using the
corresponding line.
*1 Corresponding landline number(s) is(are)
indicated next to the item.
*2 During a call, the item is not displayed even
though the feature is activated.
*3 Corresponding cellular line(s) is(are) indicated
next to the item.
*4 Corresponding lines (1, 2: landline, C: cellular
line) are indicated next to the item. If all lines
are turned off, no line is indicated.
Base unit display items
Item Meaning
Silent mode is on. (page 44)
Ringer volume is off.
*1
(page 28,
39)
Call sharing mode is off.
(page 42)
“Greeting only” is selected.
Caller messages are not
recorded.
*2
(page 55)
Power back-up mode is on.
(page 12)
In use:
Someone is using the
corresponding line.
*1 Corresponding lines (L1, L2: landline, C1-C4:
cellular line) are indicated next to the item.
*2 Corresponding landline number(s) is(are)
indicated next to the item.
CELL indicators on the base unit
The CELL indicators show each cellular line status.
Status Meaning
On A cellular phone is connected.
Ready to make/receive cellular calls.
Flashing – The cellular line is in use.
– Phonebook entries are being
copied from a cellular phone
(page 50).
– The base unit is searching for the
paired cellular phone.
– The base unit is pairing a cellular
phone.
– A cellular call is put on hold.
Flashing
rapidly
A cellular call is being received.
Light off – A cellular phone is not paired to
the base unit.
– A cellular phone is not connected
to the base unit (page 20).
Bluetooth HEADSET indicator on the base unit
The HEADSET indicator shows the Bluetooth
headset status.
Status Meaning
On A Bluetooth headset is connected to
the base unit. Ready to use it.
Flashing – A Bluetooth headset is in use
– The base unit is searching for the
paired Bluetooth headset.
– The base unit is pairing a headset.
– Mute is turned on.
Flashing
rapidly
A landline call is being received.
Light off – The Bluetooth headset is not
connected to the base unit.
– A Bluetooth headset is not paired
to the base unit.
LINE indicator on the base unit
The LINE indicators show the status of each line,
respectively, as follows.
Status Meaning
Light off The line is available.
For assistance, please visit http://www.panasonic.com/help
15
Getting Started
To Next Page
Loading...
