EasyManua.ls Logo

Panasonic KX-TG9541

Panasonic KX-TG9541
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu list
Problem Cause/solution
The display is in a language I
cannot read.
R Change the display language (page 16).
I cannot register a handset to a
base unit.
R The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 46).
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries (page 11).
I fully charged the batteries, but
still flashes,
is displayed, or
the operating time seems to be
shorter.
R Clean the battery ends ( , ) and the charge contacts with a
dry cloth and charge again.
R It is time to replace the batteries (page 11).
Making/answering calls, intercom
Problem Cause/solution
is displayed.
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 46).
Noise is heard, sound cuts in and
out.
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
The handset or base unit does
not ring.
R The ringer volume for landline is turned off. Adjust the ringer
volume (page 40).
R The ringer volume for cellular line is turned off. Adjust the ringer
volume (page 39).
R When one handset is selected to ring for cellular calls, other
units do not ring. To change the selection, see page 20.
R Silent mode is turned on. Turn it off (page 44).
I cannot make local calls with the
handset or base unit using a
cellular line.
R You need to add your area code when making cellular calls.
Store your area code in order to automatically add it to the
beginning of the 7-digit phone number when making cellular
calls (page 20).
66
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG954x(en)_0528_ver011.pdf 66 2013/05/28 11:09:55

Table of Contents

Other manuals for Panasonic KX-TG9541

Related product manuals