Panasonic KX-TGB110AL - Useful Information; Caller ID and PIN Issues; Registration and Interference

28
I have forgotten my PIN!
● Restore the phone to its default
settings, see page 25.
Cannot register a handset to the
base
● Check that correct PIN code
(default = 0000) has been entered.
● Check that the handset and base
are at least one metre away from
other electrical equipment to avoid
interference when registering.
Handset does not ring
● The handset ringer volume may
be set to Off, see page 22.
Noise interference on my phone
or on other electrical equipment
nearby
● Place the phone at least one
metre away from electrical
appliances or any metal
obstructions to avoid any risk of
interference.
icon flashes
● Handset is out of range. Move
closer to the base.
● Make sure that the handset is
registered to the base, see page
25.
● Check that the mains power is
connected properly and switched
on.
Keypad does not seem to work
● Check that the keypad lock is not
on, see page 17.
icon is not scrolling during
charge
● Adjust the handset slightly on the
base.
● Clean the charging contacts with a
cloth moistened with alcohol.
● Check that the mains power is
connected properly and switched
on.
● The battery is full. When the
handset is fully charged,
icon
will appear steadily on the display.
No Caller Display
● Check the subscription with the
network operator, see page 20.
● The caller may have withheld their
number.
● The record cannot be found in the
phonebook. Check that the correct
name/number is stored in the
phonebook, with the full area code.
Useful Information