EasyManua.ls Logo

Panasonic KX-TGB110AL - For Your Safety; Installation Safety; Operating Safeguards

Panasonic KX-TGB110AL
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Important Information
Never touch the plug with wet
hands. Danger of electric shock
exists.
Installation
To prevent the risk of re or
electrical shock, do not expose
the product to rain or any type of
moisture.
Do not place or use this product
near automatically controlled
devices such as automatic doors
and re alarms. Radio waves
emitted from this product may
cause such devices to malfunction
resulting in an accident.
Do not allow the AC adaptor
or telephone line cord to be
excessively pulled, bent or placed
under heavy objects.
It is advised not to use the
equipment at a refuelling point.
Users are reminded to observe
restrictions on the use of radio
equipment in fuel depots,
chemical plants or where blasting
operations are in progress.
Operating safeguards
Unplug the product from power
outlets before cleaning. Do not
use liquid or aerosol cleaners.
Do not disassemble the product.
Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to
become wet at all. This may cause
a re. If the telephone line cord
plug becomes wet, immediately
pull it from the telephone wall
socket, and do not use.
For your safety
To prevent severe injury and loss
of life/ property, read this section
carefully before using the product to
ensure proper and safe operation of
your product.
WARNING
Power connection
Use only the power source marked
on the product.
Do not overload power outlets and
extension cords. This can result in
the risk of re or electric shock.
Completely insert the AC adaptor/
power plug into the power outlet.
Failure to do so may cause electric
shock and/or excessive heat
resulting in a re.
Regularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power outlet,
then wiping with a dry cloth.
Accumulated dust may cause an
insulation defect from moisture,
etc. resulting in a re.
Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These conditions
can cause re or electric shock.
Conrm that smoke has stopped
emitting and contact an authorized
service centre.
Unplug from power outlets and
never touch the inside of the
product if its casing has been
broken open.

Related product manuals