Battery charging
Charge for about 7 hours.
R Confirm “Charging” is displayed (
).
R Whe
n the batteries are fully charged,
“Fully Charged” is displayed.
Note when setting up
Note for connections
R The
AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
R The unit is not designed to be used with
rotary/pulse dialling services.
Note for battery installation
R Use
the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
Note for battery charging
R I
t
is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
hum
idity.
R The unit is not designed to be used with
rotary/pulse dialling services.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery
per
formance (supplied batteries)
Operation Operating time
In continuous use 16 hours max.
Not in use (standby) 200 hours max.
Note:
R Act
ual battery performance depends on
usage and ambient environment.
10
Getting Started
TGD32xAL(en)_1103_ver021.pdf 10 3/11/2015 1:59:50 PM
To Next Page
Loading...
