Panasonic KX-TGD320AL - Getting Started; Setting Up

Setting up
Connections
n Ba
se unit
Connect the AC adaptor to the unit by
pre
ssing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
o
u
t
let.
Connect the telephone line cord to the
u
n
i
t, then to the telephone line socket
until you hear a click.
A DSL/ADSL filter (not supplied) is
r
e
q
uired if you have a DSL/ADSL service.
Connect a DSL/ADSL filter between the
telephone plug and telephone line cord.
1
2
3
4
45
Note:
R Use
only the supplied Panasonic AC
adaptor PNLV226AL.
R Use only the supplied telephone line cord.
n Charger
Connect the AC adaptor plug to the unit
unt
il you hear a click.
Connect the AC adaptor to the power
out
let.
1
2
Note:
R Use
only the supplied Panasonic AC
adaptor PNLV233AL.
Battery installation
R USE
ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R Do
NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
1
R Follow the directions on the display to set
up
the unit.
9
Getting Started
TGD32xAL(en)_1103_ver021.pdf 9 3/11/2015 1:59:49 PM