To Next PageTo Next PageHow to turn on Panasonic KX-TGD324AL handset?
If the Panasonic Answering Machine handset does not turn on even after installing charged batteries, place the handset on the base unit or charger to turn on the handset.
How to fix Panasonic Answering Machine not recording messages?
If your Panasonic Answering Machine is not recording new messages, ensure the answering system is turned on. Also, check if the message memory is full and erase any unwanted messages. Verify that the recording time is not set to “Greeting Only”, and adjust the setting if needed. Ensure that other devices, such as handsets, are not engaged in a call, as the answering system will not answer incoming calls during that time. Finally, your phone service provider’s voicemail service may be answering calls before the unit; in this case, change the unit’s number of rings setting to a lower value.
Why is remote access not working on my Panasonic Answering Machine?
If you cannot operate the answering system remotely on your Panasonic Answering Machine, ensure that the remote access code is set. If you are entering the wrong code, check your current code in the remote access code setting. Also, verify that the answering system is turned on.
Why is my Panasonic KX-TGD324AL Answering Machine handset beeping and flashing?
If the handset of your Panasonic Answering Machine beeps and/or flashes, it indicates that the battery charge is low. Fully charge the batteries.
Why can't I hear a dial tone on my Panasonic KX-TGD324AL Answering Machine?
If you cannot hear a dial tone on your Panasonic Answering Machine, make sure that you are using the supplied telephone line cord because your old telephone line cord may have a different wiring configuration. Check that the base unit’s AC adaptor or telephone line cord is connected properly. Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider.
Why is my Panasonic KX-TGD324AL base unit beeping?
If your Panasonic Answering Machine base unit beeps, it indicates that new messages have been recorded. You should listen to the new messages.
What to do if Panasonic KX-TGD324AL handset display is blank?
If the Panasonic Answering Machine handset display is blank, the handset is not turned on. Turn the power on.
Why is my Panasonic KX-TGD324AL handset not ringing?
If the handset of your Panasonic Answering Machine does not ring, the ringer volume may be turned off. Adjust the ringer volume. Also, 'Do not disturb' mode may be turned on, so turn it off.
What to do if my Panasonic KX-TGD324AL does not record new messages?
If your Panasonic Answering Machine does not record new messages, make sure the answering system is turned on. Also, the message memory might be full, so erase unwanted messages. Check if the recording time is set to 'Greeting Only' and change the setting if needed. Your phone service provider’s voicemail service may be answering calls before the unit, so change the unit’s number of rings setting to a lower value, or contact your phone service provider. The answering system will not answer incoming calls while other devices such as handsets are engaged in a call.
Why can't I make a call on my Panasonic KX-TGD324AL Answering Machine?
If you cannot make a call on your Panasonic Answering Machine, you may have dialled a call restricted number. The key lock feature may be turned on, so turn it off. Also, the unit is not designed to be used with rotary/pulse dialling services.
General| Frequency | 1.9 GHz |
|---|---|
| Answering System | Yes |
| Number of Mailboxes | 1 |
| Caller ID | Yes |
| Call Waiting Caller ID | Yes |
| Speakerphone | Yes |
| Intercom | Yes |
| Battery Type | Ni-MH |
| Talk Time | Up to 10 hours |
| Type | Cordless |
| Expandable | Yes (up to 6 handsets) |
| Phonebook Capacity | 100 names/numbers |
| Display | LCD |
